Fiber proof testers are created to apply a set load to a fusion-spliced optical fiber in order to test the effectiveness of the spliced fiber. Our fiber proof testers are available in both linear and rotary designs, for both proof and tension testing. Fiber proof testers are available for single mode, multimode, and polarization-maintaining fibers. Choose from dedicated, standalone systems or multipurpose designs which can be also competent at stripping, cleaning, cleaving, splicing, and/or recoating.
Fiber Recoaters with Proof Testers offer easy, integrated answers to optical fiber coloring machine. The fiber recoating process restores the buffer coating to a stripped fiber, offering more flexibility when compared to a heat-shrink protection sleeve, enabling it to be handled and coiled with no damage to the fusion-spliced section. The integrated linear or rotary proof tester allows users to right away test a recoated fiber with a pre-determined load and find out the long-term reliability of the fiber. Due to their ability to restore a fusion-spliced fiber to near original condition, these systems are ideal for applications like undersea optical fiber cables, submarine communication cabling, fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
This process starts off with the fusion-spliced portion of fiber being placed in the middle of the mold assembly (see image to the right). Once occur position, inserts in the fiber blocks secure the spliced fiber in position. Recoat material is pumped in to the cavity and then UV-cured. The recoated fiber can then be tested by pulling into it as much as a pre-determined load.
Recoater and Mold Assembly Options – Recoaters are available with either a computerized or manual mold assembly. The automatic mold assembly features pneumatic control of the mold plates and is also optimized for top-volume manufacturing applications. Manual mold assemblies, on the contrary, use hinged mold plates that offer more flexibility and are perfect for low-volume manufacturing or R&D applications. An automatic or manual volumetric dispensing pump and injection product is utilized to inject the recoat material into the mold cavity.
The PTR208 automatic recoater comes standard with a mold assembly for SZ stranding line; For the manual recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly is sold separately so that customers can choose the right mold coating diameter for his or her application. Custom mold coating sizes are available approximately Ø900 µm. Pre-installing of the mold assembly at the factory can also be available. Contact Tech Support for additional info on custom molds or factory assembly.
Most fiber optic cables are created professionally and are meant to work effectively for some time. Although this is the truth it doesn’t imply that the units don’t develop problems. Just like any other units, the cables develop problems and it’s your decision to distinguish and repair them. To assist you here are among the most common fiber optic fiber problems:
External damage. Common external damages are splits and scratches on the units. The units are highly sensitive; therefore, even most minor damages have the ability to prevent effective transfer of signals. For those who have noticed some defects on your units you need to replace them as quickly as possible.
The optic cable is just too long. Optic fibers come in different sizes and lengths and it’s your decision to select the one which is perfect for your application. In some cases, people install units which can be very long than needed. A cable that is certainly very long are at the chance of winding around itself. A lengthy unit is additionally at the potential risk of bending or twisting. These actions often bring about permanent damage to the optic fibers and its components. To prevent installing the wrong scale of cable you need to take the time to swrwun a tape measure and measure the distance that you are looking to cover.
Improperly installed connectors. Connectors join 2 or more cables and play an important role in determining the strength of the optic cables. It’s common for many contractors to improperly install the cables resulting to cable problems. To correct the problems you should hire a skilled contractor to put in the cables properly.
Stretching. It’s an error to get optic cables which are too long. It’s additionally a mistake to have cables that are too short since they are susceptible to stretching. As i have said, the cables are incredibly sensitive and even a minor damage can stop the cables from working properly. To avoid the cables from stretching you ought to make certain you install them at the perfect place. You need to avoid pulling the cable jacket during installation. The most effective way of going about it is utilizing grips on the connectors.
Aging. Much like other things under the optical fiber coloring machine get old. Old cables are not just ineffective inside their working, additionally they tend to develop problems every now and then. As soon as your cables are old, the easiest way of fixing them is replacing them. Our company specializes to make machines that help you in the making of fiber optic cables. We now have Secondary coating line. We have SZ stranding line and many other units. Go to the given links to find out more.