Home - AFL Uniforms - Optical Fiber Proof-Testing Machine – What To Look For..

Optical Fiber Proof-Testing Machine – What To Look For..

Posted on August 30, 2019 in AFL Uniforms

An optic cable is made of optical fibers and it’s used in a wide variety of applications such as telephone, internet and cable television. The cables are made of different materials including plastic, glass or both. The material used depends on the intended us.

Steps to make the cables. To create the cables you must have the necessary raw materials. For example, you need to have plastic or glass. You also need to have the cable making machine. To make the Optical Fiber Coloring Machine you should begin by heating your raw materials (glass or plastic) at ultra high temperatures then draw fibers at very high speeds (66 feet per second). When drawing the fibers you ought to monitor them using mirometer. This really is to ensure that the diameter is uniform in the first place to end.

For your fibers to deliver data over long distances you need to ensure that they are highly reflective. It is possible to do this by creating a mirror effect in the fiber. You are doing this by passing the fibers through ultraviolet ovens and coating cups.

After you have your reflective fiber together with you, you should subject it to a number of tests to ensure it’s in top condition. A number of the tests that you need to subject it to include: refractive index profile, tensile strength, bandwidth, fiber geometry, attenuation, temperature dependence, operating temperature, and capacity to conduct light underwater.

It’s only after the fibers have passed these tests should you package ensemble them in a cable. You can make a cable with one fiber strand or with several strands. All of it depends on the application. To put together the cable you need to surround the fibers using a loose tube of PVC. This is to ensure that there exists enough room for that Fiber Drawing Machine to bend when being routed around corners.

You ought to then cover the loose PVC with a layer of aramid yarn. The key function of the layer is always to absorb shock. Finally, you ought to seal out moisture by installing an outer PVC jacket. For the optic cable to send out data you have to hook it up to optical transmitter and receiver. The transmitter converts analog and electrical signals into linear modulating light signals. The optical receiver on the contrary accepts the sunshine signal and reformats the data into the original form.

To create good quality and marketable optic cables you should have an exceptional optic cable machine. We sell a variety of Optic fiber cable equipment like Optical Fiber Coloring Machine that allows you to make high quality fibers. We also have a unit that may help you to make high quality SZ stranding line

Cleanliness is of great importance to optic fibers. During setting up the fibers, you need to pay close attention to cleanliness. Based on experts, even minor dirt on the units can prevent them from running efficiently. Because of this, you should make sure that no dirt gets on the fibers. To help keep the units clean you should regularly clean all of them with specialty kits designed uxenwa the task. For additional information about fiber optic fibers such as details about CWDM networks you should highly consider visiting us. We have lots of details about DWDM networks. Go to the given links to learn more.