Water Damage Restoration – The Facts? It is the process of repairing a house or property to its pre loss condition. Damage to the property could be because of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. The two main large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and also the RIA (Restoration Industry Association) that recommends standards for water damage and mold restoration. The S500 damage as a result of water guide is the benchmark tool that is utilized by companies specializing in restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the first and the most crucial element of water damage and mold restoration. The assessment must be correct to ensure that an appropriate response can be utilized. In restorating the harm brought on by water, technicians and also the insurance firms must work together and know very well what is damaged and how to make restoring the harm. Identifying the source in the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage and mold restoration. Categorization is based on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This can be water which has some contaminants like water from the dishwasher, washer or toilet with urine.
Category 3 – This really is water which is highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a handful of examples.
Decontamination and Drying – Following the evaluation is done, the entire process of drying and decontaminating begins in the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is fixed to your small area and much less water continues to be absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage would be to the complete room and carpet area. Class 3 Damage – Once the entire area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is really a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments must be used. Decontamination must be done if contamination has been detected in the area. Decontamination may be performed for the entire area or even in specific pockets where contamination has become detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused due to damage is critical to get the desired results. One must be proactive through the monitoring process. Checking when the drying devices are setup properly, assessing if the personnel involved are qualified for the job and checking when the equipments have been in working order inwtsy all area of the monitoring process. Necessary steps are to be taken if something wrong is spotted through the monitoring process. The whole procedure of water damage restoration will be classified as complete just once humidity, temperature and also the moisture content is just as per industry standards. Upon completion of this type of water damage restoration process, the drying equipment can be removed.